Wire Rope Hoists

Wire Rope Hoists to meet any application!

 

Street ZX 6 Wire rope hoist

Street zx6 Double Girder Wire Rope Hoist

 

 

 

 

Lifting up to 5 Tons, The ZX6 Wire Rope Hoist is available with 4 gearbox ratio’s, 3 drum lengths & 2 different reeving arrangements. These options combine to provide a comprehensive range of hoists from 1 ton up to 5 ton capacity.  A large selection of duty ratings, lifting speeds & heights of lift.

The ZX6 is available in low headroom, base mount and double girder trolley configurations.  Request a quote here

Street ZX 8 wire rope hoist

Street ZX8 Street zx8

 

 

 

 

Lifting up to 25 tons, the ZX8 Model is generally available with 4 gearbox ratio’s, up to 4 drum lengths & 5 different reeving arrangements. These options combine to provide a comprehensive range of hoists from 1 ton up to 25 tons capacity with a large selection of duty ratings, lifting speeds & heights of lift.

The ZX8 is available in low headroom, standard headroom, base mount and double girder trolley configurations.  Request a quote here

Street ZX 10 wire rope hoist

 

Street ZX 10 Street zx

 

 

 

Lifting up to 80 Tonnes, the ZX range of hoists offers pre engineered heavy lift hoisting solutions with very high quality and competitive prices.

‘SS’ single gearbox – single rope hoists lifting up to 32 Tons
A combination of gearboxes, drums and rope diameter provides a huge model range at lower duties to suit all budgets. A single scrolled hoist drum provides the most efficient and cost effective solution for double girder applications up to 32 tons.

‘ST’ single gearbox – twin scroll hoists lifting up to 40 Tons
Double scrolled open hoist drum with a single gearbox provides a cost effective true vertical lift solution for medium to high duties up to 40 tonnes.

‘DT’ double gearbox – twin scroll hoists lifting up to 80 Tons
The top of the ZX range, the double scrolled hoist drum combined with a double gearbox for the highest lifting capacities or for very heavy duty ratings. Zero hook movement over the full lifting height.  Request a quote here

The Spacemaster® SX by R&M Materials Handling

SX
Spacemaster SXSX

The Spacemaster® SXs’ unique hoist features include new low maintenance, sealed brakes, a two-speed hoist motor, and trolley inverter control. The standard hoist nameplate will carry a CSA c/us rating as well as a NEMA 3R rating for electrical enclosures. Two-component epoxy paint is standard. Spacemaster® SX hoists are designed to meet and exceed either ASME H3 or ASME H4 duty (FEM 1Am, 2m, or 3m) ratings and provide the ultimate in easy load handling, safe operation and lasting, trouble-free performance.  Request a quote here

  • Equipped with standard hoist features
  • 230, 460, or 575 volts – 3 phase – 60 Hz power supply

SXL HEAVY LIFTING by R&M Materials Handling

 R&M SXL 2SXL
 10- 250 ton capacities, CMAA/ASME or FEM/ISO duty ratings, CSA certification, Compact double girder trolley with double reeving for true vertical lift, Dual trolley drives, All motors with thermal protection and D.C.disk brake, HoistMonitor® featuring overload protection and condition monitoring, Rope overwrap protection, Rotary limit switch and block operated upper limit switches, Long height of lifts and fast hoist speeds available, Inverter control for all motions, Hoist inverter with closed loop vector control, Trolley travel limit switch.  Request a quote here

 

Stahl Crane Systems

Stahl Wire Rope HoistStahl Wire Rope Hoist

 

 

 

 

 

 

 

 

The SH modular system permits practically unlimited combinations of the individual components. Five frame sizes, 26 S.W.L. variants between 500 kg and 25,000 kg: this makes the SH wire rope hoist the best hoist both for standard and off-standard solutions. Stationary or with one of the many travel carriages – crane builders and system builders alike will always find a suitable solution among the SH modules.
The SHA range combines the advantages of frequency-controlled hoist and travel motors with an adaptive speed range.
Stepless speed adjustment and smooth starting make work easier and reduce the stress on the crane system.
The adaptive speed control speeds up the lifting and lowering process to three times standard speed if the load is 10 % maximum load or less.
With higher loads the hoisting speed is adapted to the actual load on the hook. The SHA uses less power due to the lower output, reducing stress on the power supply and conserving valuable resources.

The SHA comes into its own in production environments where lower loads are lifted frequently, however a higher lifting capacity is required for occasional applications. A flexible range of applications and an excellent price-performance ratio make the SHA wire rope hoist an attractive alternative to the SH series of wire rope hoists.

The AS 7 range supplements the SH series in the upper S.W.L. range up to 125,000 kg. Its compact construction makes it particularly suitable for systems building and applications in restricted spaces. The AS 7 wire rope hoist is used either as stationary hoisting or towing equipment or mounted on crabs on double girder cranes and systems.
On the AS 7 wire rope hoist, motor, gearbox and rope drum are arranged in line on a common axis. This central gear concept permits high outputs and loads.
The AS 7 wire rope hoist is also available as a twin hoist for higher S.W.L.s, hoisting speeds and heights of lift.

The ASR 7 wire rope hoist has been especially developed for the load capacity range from 20 to 32 tonnes. It closes the gap between the field-proven wire rope hoist series SH and AS 7. Thanks to the lower load capacity and in some cases lower classification, smaller motors and long-life ropes with smaller diameters can be used. The bottom hook block and rope return sheave have been adapted to the smaller diameter of the rope. The result is a price saving of around 25 % compared with comparably dimensioned AS 7 with double rail crab.

Depending on load capacity and application, the ASR 7 is available in three different FEM classifications. It can be used in combination with double rail crabs on double girder overhead travelling cranes, or as stationary lifting or towing equipment. The new wire rope hoist is also available as ASRF 7 with frequency-controlled hoist motors for smooth hoisting and stepless speeds.

Explosion Proof products are available in most models from Stahl.  Click the yperlink for more information.

Request a quote here